Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Northgate?
Garage door repair in Northgate typically runs $150 – $600, depending on what’s actually broken. Spring repair is the most common fix at $180 – $340 for one spring, and a full new door installation ranges from $700 – $2,200. We’ll tell you which repair makes sense before any work starts, and the written estimate sets the final price.
A failed garage door rarely waits for a convenient moment. It’s the largest moving part of your house, it’s how most Northgate homeowners come and go every day, and when a torsion spring snaps or a cable lets go, the door stops mid-travel and everything else stops with it. We’re a garage door specialist, not a generalist slipping a door repair in between other jobs. Garage doors are all we do, and our technicians have up to 13 years of experience with the parts, brands, and problems that show up in Northgate homes.
Call (866) 429-4392 for a free estimate. We offer fast dispatch from 7am to 7pm, same-day service where scheduling allows, and upfront pricing so you know the number before anything gets touched.
Key Takeaways
- Typical garage door repair in Northgate: $150 – $600.
- One spring replaced: $180 – $340. A matched pair usually runs about twice that, since both springs in a pair are replaced together.
- A complete new door installed: $700 – $2,200.
- Estimates are free and the written estimate is the price. Call (866) 429-4392.
Garage Door Cost Breakdown (2026)
Here’s how our typical estimated ranges break down by job type for the Northgate market. Treat these as planning numbers – the written estimate after we’ve looked at your door is what sets the final price.
| Service | Typical Estimated Range | What It Covers |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Any single fix or small combination of fixes on a door that’s stuck, misaligned, or making noise |
| Spring Repair (one spring) | $180 – $340 | Torsion or extension spring replacement; a matched pair typically costs about twice this |
| Cable Repair | $130 – $250 | Frayed or snapped lift cables, often replaced in pairs |
| Opener Repair | $120 – $320 | Motor, gear, logic board, remote, sensor, and safety-reverse fixes |
| Opener Installation | $250 – $550 | Full replacement of an existing opener, including belt, chain, or screw-drive units |
| Panel Replacement | $250 – $500 | One or more dented, cracked, or bowed door sections |
| Track Realignment | $120 – $240 | Bent or knocked-out vertical and horizontal tracks |
| Roller Replacement | $110 – $220 | Worn steel or nylon rollers, usually done in sets |
| New Door Installation | $700 – $2,200 | A complete door and hardware installed in place of an aging or damaged one |
What moves a price up or down? A single spring on a standard single-car door sits at the low end of our range. A snapped cable that also pulled the track out of alignment usually lands in the higher part of the general repair band, because it’s more than one fix. Opener work depends heavily on the unit: a quick sensor alignment is dollars, while a burned-out logic board on an older builder-grade unit can push toward the top of the range. Door installation is the biggest swing because door size, insulation, panel style, and whether your current framing and tracks are reusable all affect the total. We work on eight of the industry’s dominant brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so whatever’s on your house, your door is one we know cold.
What Affects Garage Door Pricing in Northgate
Pricing isn’t a flat menu. These are the factors that move the number most in Northgate and the surrounding north Seattle neighborhoods.
- Which part failed. A roller replacement ($110 – $220) and a full spring job ($180 – $340 per spring) are very different jobs, and a door that’s failed in two ways at once (say, a snapped cable and a bent track) combines into one estimate.
- Door weight and size. Double-car and insulated doors carry more weight, which calls for heavier-duty springs and hardware. That raises the spring and hardware cost compared to a standard single-car door.
- Torsion vs. extension springs. Most Northgate homes have torsion springs mounted above the door, and replacing one takes specific tools and know-how. Extension springs along the sides are a different setup with a different labor profile.
- Age of the opener. If your opener is a Wi-Fi smart unit, a fix or swap is often quick. If it’s an older legacy or builder-grade system, parts sourcing and adjustment take more time, which affects the labor side of the estimate.
- Panel and door availability. A dented panel on a Clopay or Amarr door may be replaceable if the model and size are still made – that keeps you in the panel replacement range. If the profile’s been discontinued, a full door becomes the practical option. Because we supply garage door parts directly, we can usually tell you quickly which way it’ll go.
- Weather and wear in the north end. Northgate sits in a part of Seattle that sees its share of wind-driven rain and damp stretches through the wet months. That moisture works on steel door sections, bottom seals, and the lubricated parts of rollers and hinges, which is one reason doors here tend to need roller and seal service more often than hardware replacement.
When a repair turns into something bigger, whether it’s a misaligned track, a door that’s off its hinges, or an opener that keeps reversing, it’s usually a job we can scope out over the phone and confirm on-site. If you want a feel for how we handle repairs, see our garage door repair Green Lake page.
How Much Does Spring Repair Cost in Northgate?
Spring repair in Northgate typically costs $180 – $340 for one spring, and a matched pair – which is how most doors are set up – usually runs about twice that. This is the single most common garage door failure, and it’s also the most dangerous one to touch.
Here’s the important part: a torsion spring holds the entire weight of your door under serious tension. When it fails, it fails loudly and instantly. There’s no safe way to handle, unwind, or replace one without the right winding bars and training, and a sprung spring can cause severe injury if it lets go while someone’s working on it. That’s why we treat spring work as a trained-professional job, not a weekend project. Our technicians have up to 13 years of experience with both torsion and extension spring systems, and we’ll tell you honestly whether the spring alone failed or whether the cables and drums should be checked at the same time.
If your door is stuck open or shut with a snapped spring, don’t force it. Call (866) 429-4392 – same-day service may be available, and estimates are free.
How Much Does a New Garage Door Cost in Northgate?
A new garage door installed in Northgate runs $700 – $2,200, with the spread driven mainly by door size, insulation, and panel style. A standard single-car door at the simple end lands near the bottom of that range. A larger, insulated, or upgraded-style door pushes toward the top.
Before you assume you need a whole new door, it’s worth knowing what’s actually failing. A dented panel, worn rollers, or a bent track can often be repaired for far less – panel replacement runs $250 – $500 and roller replacement $110 – $220. On the other hand, when a door is old, has structural damage across multiple sections, or the model’s been discontinued so panels aren’t available, a full installation makes more financial sense than throwing money at a door that’s near the end of its life. We install Clopay, Amarr, Wayne Dalton, and Raynor doors, and we’ll walk you through the difference between a repair that buys you years and a replacement that ends the cycle.
Repair or replace – we’ll tell you which one actually makes sense for your door. Call (866) 429-4392 for a free on-site estimate.
How Much Does Opener Repair or Installation Cost?
Opener repair in Northgate typically costs $120 – $320, and a full opener installation runs $250 – $550. Which end of the repair range you land in depends on the unit – a safety sensor that’s been knocked out of alignment is a quick fix, while a failed motor or gear assembly takes more work.
We repair openers across both modern Wi-Fi and smart-home systems and older legacy and builder-grade units. That covers LiftMaster and Chamberlain’s current smart platforms, Genie’s range, and the Craftsman openers still running in a lot of Northgate garages. If your opener’s remote won’t sync, the door reverses partway down, or the motor runs but the door doesn’t move, those are all diagnosable and usually fixable without replacing the whole unit. When replacement is the smarter call, we’ll say so and quote you a new install in the same visit.
How to Save on Garage Door Repair in Northgate
There’s no magic discount, but there are a few practical ways to keep the bill at the low end of these ranges.
- Fix it early. A door that’s been grinding for a month usually costs more than one that started squealing yesterday. Rollers and hinges are cheap compared to a door that’s been running rough long enough to damage the opener or track.
- Ask about combining jobs. If your rollers are shot and your spring is tired, doing both in one visit is generally less than two separate service calls. We’ll tell you what’s worth bundling.
- Service the opener before it dies. A sensor alignment or remote fix is at the low end of our opener range. A burned-out motor that’s been ignored is not.
- Know when repair stops making sense. If a repair estimate is approaching the cost of a new door and the door itself is near the end of its life, putting money into it is a losing move. We’ll be straight with you about that line.
- Get the estimate in writing. Our estimates are free, and the written estimate sets the price. There’s no guesswork on the day.
Call (866) 429-4392 for a free estimate and a straight answer on what it’ll cost.
Can You Fix My Garage Door the Same Day?
In many cases, yes. Same-day service depends on the job and scheduling, and we dispatch fast from 7am to 7pm. Common fixes – a spring, a cable, a sensor realignment, roller replacement – are usually straightforward once we’ve confirmed the parts are on hand. Because we supply garage door parts directly, we’re not waiting on an order to come in before we can get your door working again. Parts in hand, not on order.
If your door is stuck open and you’re worried about security, or stuck shut and you can’t get the car out, call (866) 429-4392 as soon as it happens. We’ll tell you what we can do and when.
FAQs About Garage Door Cost in Northgate
How much does garage door repair cost in Northgate?
Garage door repair in Northgate typically costs $150 – $600, depending on the specific fix. Spring repair is $180 – $340 per spring, cable repair $130 – $250, panel replacement $250 – $500, and roller replacement $110 – $220. Call (866) 429-4392 for a free estimate – your written estimate sets the final price.
Is it cheaper to repair or replace a garage door?
Repair is cheaper in most cases, and it’s the right call when the door structure is sound and only a part has failed. A $250 – $500 panel replacement or $110 – $220 roller job beats a $700 – $2,200 new install if the rest of the door is in good shape. Replacement wins when the door has damage across multiple sections or panels are no longer available. Call (866) 429-4392 and we’ll tell you which way it actually goes for your door.
How much does a new garage door cost installed in Northgate?
A new garage door installed in Northgate typically runs $700 – $2,200. The range depends on door size, insulation, panel style, and whether your existing framing and tracks can be reused. Call (866) 429-4392 for a free on-site estimate.
Why did my garage door spring snap and what will it cost?
Springs fail from metal fatigue over thousands of open-close cycles, or all at once from age and load. Replacement usually costs $180 – $340 for one spring, and a matched pair typically runs about twice that. Don’t force the door – call (866) 429-4392 and we’ll get it handled safely with a free estimate.
Can you come out today for a broken garage door?
Often yes – same-day service may be available depending on scheduling, and we dispatch fast from 7am to 7pm. Spring, cable, and opener failures are among the jobs we can usually turn around quickly. Call (866) 429-4392 early in the day and we’ll tell you what’s possible.
Garage doors are all we do, from snapped springs and cable repairs to opener service, panel replacement, and complete new doors. Our technicians have up to 13 years of experience, we work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and we supply garage door parts directly so the fix isn’t stuck waiting on an order. Estimates are free, pricing is upfront, and the written estimate is the price. Call (866) 429-4392 today for a free estimate on your Northgate garage door.
Written by the team at Garage Door Repair Green Lake.
Pricing reflects the Northgate market as of 2026. Garage Door Repair Green Lake offers free estimates – call (866) 429-4392.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Doug Parker"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Chris Vaughn"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Luis Guzman